2025/11/26
فارسی
Rezgar Hasanzadeh

Rezgar Hasanzadeh

Academic rank: Assistant Professor
ORCID:
Education: PhD.
H-Index:
Faculty: Faculty of Engineering
ScholarId:
E-mail: r.hasanzadeh [at] kut.ac.ir
ScopusId:
Phone:
ResearchGate:
Home

Research activities

Journal Papers
Thermochemical process of polypropylene plastic waste recovered from electric and electronic apparatuses-to-clean hydrogen energy Rezgar Hasanzadeh, Taher Azdast, Chul Park (2025) INTERNATIONAL JOURNAL OF HYDROGEN ENERGY: 172; 151336
Structure-negative Poisson’s ratio analysis and optimization in a novel additively manufactured polymeric hybrid auxetic metastructure via 3D printing, finite element analysis, and machine learning Saman Jolaiy, Rezgar Hasanzadeh, Mehran Mojaver, Taher Azdast (2025) Smart Materials and Structures: 34; 085015
Auxetic 3D printed metastructure stents for enhanced mechanical and structural performance and biocompatibility in coronary artery treatments Rezgar Hasanzadeh, Saman Jolaiy, Mehran Mojaver, Taher Azdast, Chul Park (2025) Acta Biomaterialia: 202; 641-659
Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction Reza Navidpour, Taher Azdast, Rezgar Hasanzadeh, Milad Moradian, Peyman Mihankhah, Asghar Rasouli (2025) MACROMOLECULAR MATERIALS AND ENGINEERING: 310; 2400450
Optimization of energy absorption of additively manufactured polyamide/microcarbon fiber polymeric composites in 3D printing using Taguchi method Rezgar Hasanzadeh (2025) POLYMER ENGINEERING AND SCIENCE: 65; 3639-3649
Investigation of the effects of walnut shell wood particles on the mechanical properties of injection molded wood- polyethylene-polycarbonate composites Rasool Al-Arkawazi, Taher Azdast, Rezgar Hasanzadeh (2025) SPE Polymers: 6; 10175
A new polymeric hybrid auxetic structure additively manufactured by fused filament fabrication 3D printing: Machine learning-based energy absorption prediction and optimization Rezgar Hasanzadeh (2024) Polymers: 16; 3565
Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams Sara Khaleghi, Taher Azdast, Rezgar Hasanzadeh, Chul Park, Asghar Rasouli (2024) Polymer Engineering & Science: 64; 5351-5359
Acrylonitrile butadiene styrene/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding with optimized performance Bashar Azerang, Taher Azdast, Ali Doniavi, Rezgar Hasanzadeh (2024) Journal of Thermoplastic Composite Materials: ;
Fabrication of bone tissue engineering scaffolds with a hierarchical structure using combination of 3D printing/gas foaming techniques Soroush Aghaiee, Taher Azdast, Farhad Farhangpazhouh, Rezgar Hasanzadeh (2024) Journal of Applied Polymer Science: 141;
Machine learning utilization on air gasification of polyethylene terephthalate waste Rezgar Hasanzadeh, Taher Azdast (2024) Waste Management Bulletin: 2; 75-82
Machine learning and multi-criteria decision analysis for polyethylene air-gasification considering energy and environmental aspects Amirreza Gharibi, Reza Babazadeh, Rezgar Hasanzadeh (2024) Process Safety and Environmental Protection: 183; 46-58
Performance optimization of acrylonitrile butadiene styrene/thermoplastic polyurethane composite foams blown with carbon dioxide using <scp>Taguchi</scp> technique Sara Khaleghi, Taher Azdast, Ali Doniavi, Rezgar Hasanzadeh (2024) Journal of Applied Polymer Science: 141;
An experimental and numerical study on an innovative metastructure for <scp>3D</scp> printed thermoplastic polyurethane with auxetic performance Mehran Mojaver, Taher Azdast, Rezgar Hasanzadeh (2024) Polymers for Advanced Technologies: 35;
Polyethylene gasification for sustainable plastic waste management with respect to energy, exergy, and environmental considerations: A non-linear programming optimization Ehsan Doniavi, Reza Babazadeh, Rezgar Hasanzadeh (2024) Process Safety and Environmental Protection: 182; 86-97
Optimization of Renewable Energy Supply Chain for Sustainable Hydrogen Energy Production from Plastic Waste Ehsan Doniavi, Reza Babazadeh, Rezgar Hasanzadeh (2023) Sustainability: 15; 16813
Biocompatible tissue-engineered scaffold polymers for 3D printing and its application for 4D printing Rezgar Hasanzadeh, Peyman Mihankhah, Taher Azdast, Asghar Rasouli, Mohadese Shamkhali, Chul Park (2023) Chemical Engineering Journal: 476; 146616
Process‐property relationship in polylactic acid composites reinforced by iron microparticles and<scp>3D</scp>printed by fused filament fabrication Rezgar Hasanzadeh, Peyman Mihankhah, Taher Azdast, Mahdi Bodaghi, Mahmoud Moradi (2023)
Determination of electromagnetic traveling path in polymer/multi‐walled carbon nanotube nanocomposite foams and analysis by Taguchi technique Bashar Azerang, Taher Azdast, Ali Doniavi, Rezgar Hasanzadeh (2023)
A Regression Analysis on Steam Gasification of Polyvinyl Chloride Waste for an Efficient and Environmentally Sustainable Process Rezgar Hasanzadeh, Rzgar Abdalrahman (2023)
Optimization of Process Parameters of Fused Filament Fabrication of Polylactic Acid Composites Reinforced by Aluminum Using Taguchi Approach Rezgar Hasanzadeh, Peyman Mihankhah, Taher Azdast, Soroush Aghaiee, Chul Park (2023)
A metaheuristic particle swarm optimization for enhancing energetic and exergetic performances of hydrogen energy production from plastic waste gasification Amirreza Gharibi, Ehsan Doniavi, Rezgar Hasanzadeh (2023)
A review of the state-of-the-art on thermal insulation performance of polymeric foams Rezgar Hasanzadeh, Taher Azdast, Patrick Lee, Chul Park (2023)
Innovative Applications of Polymeric Foams Rezgar Hasanzadeh, Taher Azdast (2022)
High-efficiency and low-pollutant waste polystyrene and waste polystyrene foam gasification: Comprehensive comparison analysis, multi-objective optimization and multi-criteria decision analysis Rezgar Hasanzadeh, Taher Azdast, Mehran Mojaver, Chul Park (2022)
Cost-effective and reproducible technologies for fabrication of tissue engineered scaffolds: The state-of-the-art and future perspectives Rezgar Hasanzadeh, Taher Azdast, Mehran Mojaver, Mohammad Mehdi Darvishi, Chul Park (2022)
Fused filament fabrication of biodegradable polylactic acid reinforced by nanoclay as a potential biomedical material Peyman Mihankhah, Taher Azdast, Hurieh Mohammadzadeh, Rezgar Hasanzadeh, Soroush Aghaiee (2022)
A novel systematic multi-objective optimization to achieve high-efficiency and low-emission waste polymeric foam gasification using response surface methodology and TOPSIS method Rezgar Hasanzadeh, Mehran Mojaver, Taher Azdast, Chul Park (2022)
Morphological properties and mechanical performance of polylactic acid scaffolds fabricated by a novel fused filament fabrication/gas foaming coupled method Asghar Rasouli, Taher Azdast, Hurieh Mohammadzadeh, Peyman Mihankhah, Rezgar Hasanzadeh (2022)
Comparative study on air gasification of plastic waste and conventional biomass based on coupling of AHP/TOPSIS multi-criteria decision analysis Mehran Mojaver, Rezgar Hasanzadeh, Taher Azdast, Chul Park (2022)
Polyethylene waste gasification syngas analysis and multi-objective optimization using central composite design for simultaneous minimization of required heat and maximization of exergy efficiency Rezgar Hasanzadeh, Mehran Mojaver, Taher Azdast, Chul Park (2021)
Increasing cell density/decreasing cell size to produce microcellular and nanocellular thermoplastic foams: A review Taher Azdast, Rezgar Hasanzadeh (2021)
Assessments of key features and Taguchi analysis on hydrogen rich syngas production via gasification of polyethylene, polypropylene, polycarbonate and polyethylene terephthalate wastes Mehran Mojaver, Taher Azdast, Rezgar Hasanzadeh (2021)
A study on fabrication of nanocomposite polyethylene foam through extrusion foaming procedure Milad Rostami, Taher Azdast, Rezgar Hasanzadeh, Milad Moradian (2021)
Polylactide scaffold fabrication using a novel combination technique of fused deposition modeling and batch foaming: dimensional accuracy and structural properties Taher Azdast, Rezgar Hasanzadeh (2021)
Synergetic effect of MWCNT/nanoclays on microcellular polystyrene hybrid nanocomposite foams Rezgar Hasanzadeh, Mohammad Mehdi Darvishi, Taher Azdast (2020)
Thermal Conductivity of Low-Density Polyethylene Foams Part II: Deep Investigation using Response Surface Methodology Rezgar Hasanzadeh, Taher Azdast, Ali Doniavi (2020)
Experimental assessment and optimization of shrinkage behavior of injection molded polycarbonate parts Taher Azdast, Rezgar Hasanzadeh (2019)
Thermal Conductivity of Low Density Polyethylene Foams Part I: Comprehensive Study of Theoretical Models Rezgar Hasanzadeh, Taher Azdast, Ali Doniavi, Richard Eungkee Lee (2019)
On fabrication and characteristics of injection molded ABS/Al2O3 nanocomposites Amin Abedini, Taghi Asiyabi, Heather R. Campbell, Rezgar Hasanzadeh, Taher Azdast (2019)
Comprehensive Investigation of Morphological Properties of ABS/Nanoclay/PMMA Polymeric Nanocomposite Foam Sajjad Mamaghani Shishavan, Taher Azdast, Rezgar Hasanzadeh, Milad Moradian (2019)
A prediction model using response surface methodology based on cell size and foam density to predict thermal conductivity of polystyrene foams Rezgar Hasanzadeh, Taher Azdast, Ali Doniavi, Milad Rostami (2019)
Multi-objective optimization of heat transfer mechanisms of microcellular polymeric foams from thermal-insulation point of view Rezgar Hasanzadeh, Taher Azdast, Ali Doniavi, Richard Eungkee Lee (2019)
Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models Rezgar Hasanzadeh, Taher Azdast, Ali Doniavi, Richard Eungkee Lee (2019)
Tensile properties of friction stir welding of thermoplastic pipes based on a novel designed mechanism Amir Mosavvar, Taher Azdast, Milad Moradian, Rezgar Hasanzadeh (2019)
Investigation of mechanical and morphological properties of acrylonitrile butadiene styrene nanocomposite foams from analytical hierarchy process point of view Taher Azdast, Richard Eungkee Lee, Rezgar Hasanzadeh, Milad Moradian, Sajjad Mamaghani Shishavan (2018)
A Taguchi analysis on structural properties of polypropylene microcellular nanocomposite foams containing Fe2O3 nanoparticles in batch process Siamak Molani, Taher Azdast, Ali Doniavi, Rezgar Hasanzadeh, Milad Moradian, Sajjad Mamaghani Shishavan (2018)
Tensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes Taher Azdast, Rezgar Hasanzadeh (2018)
Improving Impact Strength in FSW of Polymeric Nanocomposites Using Stepwise Tool Design Taher Azdast, Rezgar Hasanzadeh, Milad Moradian (2017)
Tensile and hardness properties of polycarbonate nanocomposites in the presence of styrene maleic anhydride as compatibilizer Richard Eungkee Lee, Atefe Afsari Ghazi, Taher Azdast, Rezgar Hasanzadeh, Sajjad Mamaghani Shishavan (2017)
A multi-criteria decision analysis on injection moulding of polymeric microcellular nanocomposite foams containing multi-walled carbon nanotubes Richard Eungkee Lee, Rezgar Hasanzadeh, Taher Azdast (2017)
Improving the Mechanical Properties of Poly Methyl Methacrylate Nanocomposites for Dentistry Applications Reinforced with Different Nanoparticles Samrand Rashahmadi, Rezgar Hasanzadeh, Sina Mosalman (2017)
An investigation on the mechanical properties of friction stir welded polycarbonate/aluminium oxide nanocomposite sheets Ali Doniavi, Saeedeh Babazadeh, Taher Azdast, Rezgar Hasanzadeh (2016)
Books
Plastic Waste Treatment and Management Rezgar Hasanzadeh, Parisa Mojaver (2023)
Evaluation of Air Polyurethane Foam Waste Gasification Rezgar Hasanzadeh, Taher Azdast, Chul Park (2023)
Evaluation of Steam Polyurethane Foam Waste Gasification Rezgar Hasanzadeh, Taher Azdast (2023)
Multi-criteria Decision-Making Analysis of Plastic Waste Gasification Rezgar Hasanzadeh, Ali Doniavi, Marc Rosen (2023)
Polymeric Foams: Innovations in Technologies and Environmentally Friendly Materials Taher Azdast, Rezgar Hasanzadeh, Richard Eungkee Lee (2022)
Theses

Research interests

  • Polymeric Manufacturing Processes
  • 3D and 4D Printing
  • Polymeric Metamaterials
  • Polymeric (Nano/Micro) Auxetic Structures
  • Polymeric Nano/Micro Composites
  • Polymeric (Nano/Micro) Foams
  • Artificial Intelligence and Machine Learning in Manufacturing
  • Optimization of Manufacturing Processes
  • Plastic Waste Management
More
Powered By Jiro