| 1 |
Investigation of the effects of walnut shell wood particles on the mechanical properties of injection molded wood- polyethylene-polycarbonate composites
|
SPE Polymers
|
| 2 |
Thermochemical process of polypropylene plastic waste recovered from electric and electronic apparatuses-to-clean hydrogen energy
|
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
|
| 3 |
Structure-negative Poisson’s ratio analysis and optimization in a novel additively manufactured polymeric hybrid auxetic metastructure via 3D printing, finite element analysis, and machine learning
|
Smart Materials and Structures
|
| 4 |
Auxetic 3D printed metastructure stents for enhanced mechanical and structural performance and biocompatibility in coronary artery treatments
|
Acta Biomaterialia
|
| 5 |
Proposing a Novel Merged Re-Entrant Polymeric Auxetic Metastructure Manufactured by Fused Filament Fabrication 3D Printing Process
|
علوم و تکنولوژی پلیمر
|
| 6 |
Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction
|
MACROMOLECULAR MATERIALS AND ENGINEERING
|
| 7 |
بررسی اثر عوامل فوم‌زای فیزیکی دی‌اکسیدکربن و نیتروژن بر روی خواص ساختاری فوم‌های پلیمری پلی‌اتیلن تولید شده به روش اکستروژن
|
مهندسی ساخت و تولید
|
| 8 |
بررسی خواص صوتی قطعات با ساختار متخلخل درجه‌بندی شده چاپ شده با روش ساخت رشته ذوبی
|
مجله مهندسی ساخت و تولید ایران
|
| 9 |
Biocompatible tissue-engineered scaffold polymers for 3D printing and its application for 4D printing
|
Chemical Engineering Journal
|
| 10 |
An experimental and numerical study on an innovative metastructure for <scp>3D</scp> printed thermoplastic polyurethane with auxetic performance
|
Polymers for Advanced Technologies
|
| 11 |
Process‐property relationship in polylactic acid composites reinforced by iron microparticles and<scp>3D</scp>printed by fused filament fabrication
|
Polymer Engineering & Science
|
| 12 |
Optimization of Process Parameters of Fused Filament Fabrication of Polylactic Acid Composites Reinforced by Aluminum Using Taguchi Approach
|
Metals
|
| 13 |
اثر پارامترهای فرآیندی چاپگر ساخت رشته ذوبی بر استحکام کششی و چگالی نانوکامپوزیتهای پلی لاکتیک اسید/نانورس
|
|
| 14 |
بررسی اثر قطر قالب بر روی خواص ساختاری فوم‌های پلی‌اتیلن تولید شده به روش اکستروژن
|
|
| 15 |
بهینه سازی شرایط فرآیندی چاپ سه بعدی FDM قطعات پلیمری زیست تخریب پذیر پلی لاکتیک اسید
|
|
| 16 |
ارائه ی روشی نوین با ترکیب ساخت رشته ی ذوبی (FFF)/فوم توده ای به منظور بهبود خواص قطعات پلیمری زیست تخریب پذیر پلی لاکتیک اسید
|
|
| 17 |
Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams
|
Polymer Engineering & Science
|
| 18 |
Acrylonitrile butadiene styrene/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding with optimized performance
|
Journal of Thermoplastic Composite Materials
|
| 19 |
Fabrication of bone tissue engineering scaffolds with a hierarchical structure using combination of 3D printing/gas foaming techniques
|
Journal of Applied Polymer Science
|
| 20 |
Machine learning utilization on air gasification of polyethylene terephthalate waste
|
Waste Management Bulletin
|
| 21 |
Performance optimization of acrylonitrile butadiene styrene/thermoplastic polyurethane composite foams blown with carbon dioxide using <scp>Taguchi</scp> technique
|
Journal of Applied Polymer Science
|
| 22 |
Determination of electromagnetic traveling path in polymer/multi‐walled carbon nanotube nanocomposite foams and analysis by Taguchi technique
|
Polymer Engineering & Science
|
| 23 |
A review of the state-of-the-art on thermal insulation performance of polymeric foams
|
Thermal Science and Engineering Progress
|
| 24 |
Innovative Applications of Polymeric Foams
|
Materials
|
| 25 |
Cost-effective and reproducible technologies for fabrication of tissue engineered scaffolds: The state-of-the-art and future perspectives
|
Polymer
|
| 26 |
High-efficiency and low-pollutant waste polystyrene and waste polystyrene foam gasification: Comprehensive comparison analysis, multi-objective optimization and multi-criteria decision analysis
|
Fuel
|
| 27 |
Morphological properties and mechanical performance of polylactic acid scaffolds fabricated by a novel fused filament fabrication/gas foaming coupled method
|
The International Journal of Advanced Manufacturing Technology
|
| 28 |
A novel systematic multi-objective optimization to achieve high-efficiency and low-emission waste polymeric foam gasification using response surface methodology and TOPSIS method
|
Chemical Engineering Journal
|
| 29 |
Fused filament fabrication of biodegradable polylactic acid reinforced by nanoclay as a potential biomedical material
|
Journal of Thermoplastic Composite Materials
|
| 30 |
Polyethylene waste gasification syngas analysis and multi-objective optimization using central composite design for simultaneous minimization of required heat and maximization of exergy efficiency
|
Energy Conversion and Management
|
| 31 |
Comparative study on air gasification of plastic waste and conventional biomass based on coupling of AHP/TOPSIS multi-criteria decision analysis
|
Chemosphere
|
| 32 |
A study on fabrication of nanocomposite polyethylene foam through extrusion foaming procedure
|
Cellular Polymers
|
| 33 |
Assessments of key features and Taguchi analysis on hydrogen rich syngas production via gasification of polyethylene, polypropylene, polycarbonate and polyethylene terephthalate wastes
|
International Journal of Hydrogen Energy
|
| 34 |
Polylactide scaffold fabrication using a novel combination technique of fused deposition modeling and batch foaming: dimensional accuracy and structural properties
|
The International Journal of Advanced Manufacturing Technology
|
| 35 |
Increasing cell density/decreasing cell size to produce microcellular and nanocellular thermoplastic foams: A review
|
Journal of Cellular Plastics
|
| 36 |
Synergetic effect of MWCNT/nanoclays on microcellular polystyrene hybrid nanocomposite foams
|
Carbon Letters
|
| 37 |
Experimental assessment and optimization of shrinkage behavior of injection molded polycarbonate parts
|
Materials Research Express
|
| 38 |
On fabrication and characteristics of injection molded ABS/Al2O3 nanocomposites
|
The International Journal of Advanced Manufacturing Technology
|
| 39 |
A prediction model using response surface methodology based on cell size and foam density to predict thermal conductivity of polystyrene foams
|
Heat and Mass Transfer
|
| 40 |
Thermal-insulation performance of low density polyethylene (LDPE) foams: Comparison between two radiation thermal conductivity models
|
|
| 41 |
Thermal Conductivity of Low-Density Polyethylene Foams Part II: Deep Investigation using Response Surface Methodology
|
Journal of Thermal Science
|
| 42 |
Thermal Conductivity of Low Density Polyethylene Foams Part I: Comprehensive Study of Theoretical Models
|
Journal of Thermal Science
|
| 43 |
Tensile properties of friction stir welding of thermoplastic pipes based on a novel designed mechanism
|
Welding in the World
|
| 44 |
Multi-objective optimization of heat transfer mechanisms of microcellular polymeric foams from thermal-insulation point of view
|
Thermal Science and Engineering Progress
|
| 45 |
Comprehensive Investigation of Morphological Properties of ABS/Nanoclay/PMMA Polymeric Nanocomposite Foam
|
Polymer Science, Series A
|
| 46 |
Investigation of mechanical and morphological properties of acrylonitrile butadiene styrene nanocomposite foams from analytical hierarchy process point of view
|
Polymer Bulletin
|
| 47 |
A Taguchi analysis on structural properties of polypropylene microcellular nanocomposite foams containing Fe2O3 nanoparticles in batch process
|
Plastics, Rubber and Composites
|
| 48 |
Tensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes
|
International Journal of Engineering
|
| 49 |
Tensile and hardness properties of polycarbonate nanocomposites in the presence of styrene maleic anhydride as compatibilizer
|
Advances in Polymer Technology
|
| 50 |
Improving Impact Strength in FSW of Polymeric Nanocomposites Using Stepwise Tool Design
|
Materials and Manufacturing Processes
|
| 51 |
A multi-criteria decision analysis on injection moulding of polymeric microcellular nanocomposite foams containing multi-walled carbon nanotubes
|
Plastics, Rubber and Composites
|
| 52 |
An investigation on the mechanical properties of friction stir welded polycarbonate/aluminium oxide nanocomposite sheets
|
Journal of Elastomers & Plastics
|
| 53 |
Tri-objective central composite design optimization of co-gasification of eucalyptus biomass and polypropylene waste
|
Biomass Conversion and Biorefinery
|
| 54 |
Decision analysis for plastic waste gasification considering energy, exergy, and environmental criteria using TOPSIS and grey relational analysis
|
Process Safety and Environmental Protection
|
| 55 |
Developing gasification process of polyethylene waste by utilization of response surface methodology as a machine learning technique and multi-objective optimizer approach
|
International Journal of Hydrogen Energy
|
| 56 |
Air co-gasification process of LDPE/HDPE waste based on thermodynamic modeling: Hybrid multi-criteria decision-making techniques with sensitivity analysis
|
International Journal of Hydrogen Energy
|
| 57 |
Polyurethane Foam Waste Upcycling into an Efficient and Low Pollutant Gasification Syngas
|
Polymers
|
| 58 |
Low-emission and energetically efficient co-gasification of coal by incorporating plastic waste: A modeling study
|
Chemosphere
|