Parisa Mojaver

Research activities

Journal Papers

Energy, exergy, and economic performance analysis of integrated parabolic trough collector with organic rankine cycle and ejector refrigeration cycle Hamid Hawi Ogaili, Shahram Khalilarya, Ata Chitsaz, Parisa Mojaver (2025)

Energy, Exergy, and Economic Performance Analysis of Integrated CPVT with Supercritical CO2 Ejector Refrigeration Cycle for Residential Applications Hamid Hawi Ogaili, Shahram Khalilarya, Ata Chitsaz, Parisa Mojaver (2024)

Blue hydrogen production using palladium membrane in a zero-emission energy system by carbon dioxide capturing Parisa Mojaver, Shahram Khalilarya (2024)

Sustainable waste-to-hydrogen energy conversion through face mask waste gasification integrated with steam methane reformer and water-gas shift reactor Parisa Mojaver, Shahram Khalilarya (2024)

An artificial intelligence study on energy, exergy, and environmental aspects of upcycling face mask waste to a hydrogen-rich syngas through a thermal conversion process Parisa Mojaver, Shahram Khalilarya (2024)

Plastic waste/chickpea straw-to-fuels and power through co-gasification in a novel zero-emission system by CO2 capturing and utilization Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz, Samad Jafarmadar (2023)

Decision analysis for plastic waste gasification considering energy, exergy, and environmental criteria using TOPSIS and grey relational analysis Rezgar Hasanzadeh, Parisa Mojaver, Taher Azdast, Shahram Khalilarya, Ata Chitsaz, Marc Rosen (2023)

Developing gasification process of polyethylene waste by utilization of response surface methodology as a machine learning technique and multi-objective optimizer approach Rezgar Hasanzadeh, Parisa Mojaver, Taher Azdast, Shahram Khalilarya, Ata Chitsaz (2023)

Air co-gasification process of LDPE/HDPE waste based on thermodynamic modeling: Hybrid multi-criteria decision-making techniques with sensitivity analysis Rezgar Hasanzadeh, Parisa Mojaver, Shahram Khalilarya, Taher Azdast (2023)

Performance assessment and optimization of gasification of indigenous biomasses of West Azerbaijan province to attain a hydrogen-rich syngas based on thermodynamic modeling Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz, Samad Jafarmadar (2022)

Soft computing investigation of stand-alone gas turbine and hybrid gas turbine–solid oxide fuel cell systems via artificial intelligence and multi-objective grey wolf optimizer Amirhossein Hasanzadeh, Ata Chitsaz, Amir Qasemi, Parisa Mojaver, Seyed Mojtaba Alirahmi (2022)

Polyurethane Foam Waste Upcycling into an Efficient and Low Pollutant Gasification Syngas Rezgar Hasanzadeh, Parisa Mojaver, Shahram Khalilarya, Taher Azdast, Ata Chitsaz, Mehran Mojaver (2022)

Upcycling of biomass using gasification process based on various biomass types and different gasifying agents: systematic multi-criteria decision and sensitivity analysis Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz, Samad Jafarmadar (2022)

Biomass and low-density polyethylene waste composites gasification: Orthogonal array design of Taguchi technique for analysis and optimization Rezgar Hasanzadeh, Parisa Mojaver, Ata Chitsaz, Mehran Mojaver, Mohammad Jalili, Marc Rosen (2022)

Low-emission and energetically efficient co-gasification of coal by incorporating plastic waste: A modeling study Rezgar Hasanzadeh, Parisa Mojaver, Taher Azdast, Ata Chitsaz, Chul Park (2022)

Analysis of variance and multi-objective optimization of efficiencies and emission in air/steam rigid and flexible polyurethane foam wastes gasification Rezgar Hasanzadeh, Parisa Mojaver, Ata Chitsaz, Mehran Mojaver, Marc Rosen (2022)

Supercritical CO2 utilization in a CO2 zero emission novel system for bio-synthetic natural gas, power and freshwater productions Ata Chitsaz, Shahram Khalilarya, Parisa Mojaver (2022)

Tri-objective central composite design optimization of co-gasification of eucalyptus biomass and polypropylene waste Parisa Mojaver, Rezgar Hasanzadeh, Ata Chitsaz, Taher Azdast, Mehran Mojaver (2022) Biomass Conversion and Biorefinery: 14; 4829-4841

Multi-objective optimization of power, CO2 emission and exergy efficiency of a novel solar-assisted CCHP system using RSM and TOPSIS coupled method Navid Mahdavi, Parisa Mojaver, Shahram Khalilarya (2022) Renewable Energy: 185; 506-524

Post-combustion emission control of a gas turbine cooperated solar assisted CO2 based-reforming utilizing CO2 capture technology Milad Irani, Mahsa Mehrara, Parisa Mojaver, Ata Chitsaz (2022) Journal of CO2 Utilization: 56; 101847

Multi-objective optimization and decision analysis of a system based on biomass fueled SOFC using couple method of entropy/VIKOR Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz (2022) Energy Conversion and Management: 203; 112260

Stand-alone gas turbine and hybrid MCFC and SOFC-gas turbine systems: Comparative life cycle cost, environmental, and energy assessments Amirhossein Hasanzadeh, Ata Chitsaz, Parisa Mojaver, Amir Qasemi (2021) Energy Reports: 7; 4659-4680

Parametric study and performance assessment of a biomass based alkali metal thermoelectric converter hybrid system Mahsa Mehrara, Ata Chitsaz, Milad Irani, Mortaza Khalilian, Parisa Mojaver, Marc Rosen (2021) Energy Conversion and Management: 240; 114288

Optimization of a combined heat and power system based gasification of municipal solid waste of Urmia University student dormitories via ANOVA and taguchi approaches Shahram Khalilarya, Ata Chitsaz, Parisa Mojaver (2021) International Journal of Hydrogen Energy: 46; 1815-1827

Combined systems based on <scp>OSOFC</scp>/<scp>HSOFC</scp>: Comparative analysis and multi‐objective optimization of power and emission Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz (2020) International Journal of Energy Research: 45; 5449-5469

Co-generation of electricity and heating using a SOFC-ScCO2 Brayton cycle-ORC integrated plant: Investigation and multi-objective optimization Parisa Mojaver, Majid Abbasalizadeh, Shahram Khalilarya, Ata Chitsaz (2020) International Journal of Hydrogen Energy: 45; 27713-27729

Investigation and optimization of a Co-Generation plant integrated of gasifier, gas turbine and heat pipes using minimization of Gibbs free energy, Lagrange method and response surface methodology Parisa Mojaver, Samad Jafarmadar, Shahram Khalilarya, Ata Chitsaz (2020) International Journal of Hydrogen Energy: 45; 19027-19044

Multi-objective optimization of a power generation system based SOFC using Taguchi/AHP/TOPSIS triple method Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz, Mohsen Assadi (2020) Sustainable Energy Technologies and Assessments: 38; 100674

Comprehensive comparison of SOFCs with proton-conducting electrolyte and oxygen ion-conducting electrolyte: Thermoeconomic analysis and multi-objective optimization Parisa Mojaver, Ata Chitsaz, Mohsen Sadeghi, Shahram Khalilarya (2020) Energy Conversion and Management: 205; 112455

Study of synthesis gas composition, exergy assessment, and multi-criteria decision-making analysis of fluidized bed gasifier Parisa Mojaver, Samad Jafarmadar, Shahram Khalilarya, Ata Chitsaz (2019) International Journal of Hydrogen Energy: 44; 27726-27740

Thermo-economic assessment of a novel trigeneration system based on coupling of organic Rankine cycle and absorption-compression cooling and power system for waste heat recovery Mohammad Zoghi, Hamed Habibi, Ata Chitsaz, Mojtaba Ayazpour, Parisa Mojaver (2019) Energy Conversion and Management: 196; 567-580

Exergy and energy analysis of a biogas-fuelled micro-tubular flame fuel cell Milad Nasrzad, Samad Jafarmadar, Parisa Mojaver (2019) International Journal of Exergy: 30; 294

Thermodynamic Investigation and Optimization of a Power Generation System based Solid Oxide Fuel Cell using Taguchi Approach Parisa Mojaver, Samad Jafarmadar, Shahram Khalilarya, Ata Chitsaz (2019) International Journal of Engineering: 32;

Multi-objective optimization using response surface methodology and exergy analysis of a novel integrated biomass gasification, solid oxide fuel cell and high-temperature sodium heat pipe system Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz (2019) Applied Thermal Engineering: 156; 627-639

Performance assessment of a combined heat and power system: A novel integrated biomass gasification, solid oxide fuel cell and high-temperature sodium heat pipe system part I: Thermodynamic analysis Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz (2018) Energy Conversion and Management: 171; 287-297

Books

Plastic Waste Treatment and Management Gasification Processes Rezgar Hasanzadeh, Parisa Mojaver (2023)

Plastic Waste Gasification Parisa Mojaver, Ata Chitsaz, Seyyed Joneid Hasannejad, Mortaza Khalilian (2023)

Air Plastic Waste Gasification Parisa Mojaver, Shahram Khalilarya (2023)

Steam Plastic Waste Gasification Parisa Mojaver, Shahram Khalilarya, Ata Chitsaz (2023)

Plastic Waste Treatment and Management Rezgar Hasanzadeh, Parisa Mojaver (2023)

Theses

Energy, exergy and economic analysis of CCHP system based on CPVT and ejector refrigeration cycle in a building Shahram Khalilarya, Ata Chitsaz, Parisa Mojaver, Hamid Hawi Ogaili (2025)

.row3_default .researchActivities .researchTypeContent { opacity: 1; position: static; height: initial; } .row3_default .researchActivities .researchActivitiesWrapper .researchTypeTitle { visibility: visible; font-family: Arial; font-size: 1.3rem; transition: background-color .5s, color .5s; display: block; float: left; color: rgb(102, 102, 102); background-color: rgb(255, 255, 255); direction: ltr; text-align: left; padding: .5% 2%; cursor: pointer; border-radius: 5%; margin-top: 1%; } .row3_default .researchActivities .researchTypeContent table .Gv-Empty { text-align: left; direction: ltr; }

Research interests

Energy systems
Renewable energy
Thermodynamic analysis
Artificial Intelligence in energy systems
Gasification
Multi-criteria decision making in energy systems
Machine learning in energy systems
Fuel cells

Name: Hamid Hawi Ogaili

AcademicLevel: PHD

Field: Mechanical Engineering

Thesis: Energy, exergy and exergy economic analysis of CCHP system based on CPVT and ejector refrigeration cycle in a building
Name: Yousef Shokri

AcademicLevel: PHD

Field: Mechanical Engineering

Thesis: Thermodynamic analysis and multi-objective optimization of a novel combined power and fresh water production system using heat transformer based on solar pond
Name: Qusay AbdulWahab AbdulRazaq Alhashimi

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Power, compressed air storage, heating supply for a refinery applying solid oxide fuel cell with internal reformer
Name: Amer Oudah Yakoob Alkhafaji

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Energy and exergy analysis of a combined heat and power generation cycle from a geothermal energy source
Name: Dhabab jabber Hussein Hussein

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Compressed air energy storage and power production from waste heat recovery of a diesel engine power plant
Name: Heydar Jafyt Javad Alhasnavi

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: The thermodynamic analysis of a novel combined heat and power system based on geothermal energy and transcritical CO2 cycle
Name: Hussein Ali Kneish Kasir

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Thermodynamic analysis of a tri-generation system producing power, heat, and hydrogen based on proton exchange membrane electrolyzer
Name: Parviz Marufzadeh

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Thermodynamic modeling of a power and freshwater production applying exhaust gas recovery to flare of a petrochemical unit
Name: Milad Abbasi Varzaghani

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Energy, exergy, economic, and emergy analysis of a heat and power generation system using biogas fuel of waste landfill
Name: Mohammad Kaveh

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Automobile engine design based on internal combustion engine and solid oxide fuel cell with zero emissions
Name: Akbar Azizizadeh

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Thermodynamic analysis of the proposed system consisting of the Brayton Cycle with supercritical CO2 working fluid and the Kalina cycle based on biomass
Name: Mohammad Ebrahimi

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Thermodynamic analysis of the simultaneous production of power and heat with the cascade Kalina cycle based on municipal waste
Name: Sُajad Shabankhah

AcademicLevel: Master

Field: Mechanical Engineering

Thesis: Compressed air storage and power generation using municipal solid waste stand points of thermo-economic and emergy analysis

Parisa Mojaver

Research activities

Research interests

Students