03 تیر 1400
مجيد محدثي

مجید محدثی

مرتبه علمی: استادیار
نشانی: ایران، کرمانشاه، بزرگراه امام خمینی (ره)، دانشگاه صنعتی کرمانشاه، دانشکده مهندسی، گروه مهندسی شیمی
تحصیلات: دکترای تخصصی / مهندسی شیمی
تلفن: 083-38305000 (1167, 1058, 1025)
دانشکده: دانشکده مهندسی

مشخصات پژوهش

عنوان
Liquid-Liquid Extraction in a Microextractor: A Laboratory Examination and Thermodynamic Modeling of N-Hexane +Benzene + Sulfolane System
نوع پژوهش مقاله چاپ شده
کلیدواژه‌ها
Liquid-liquid extraction, Microtube, Optimization, Thermodynamic modeling, NRTL, UNIQUAC
پژوهشگران مجید محدثی (نفر اول)، بابک عاقل (نفر دوم)، اشکان گوران (نفر سوم)

چکیده

This study aimed at investigating liquid-liquid extraction of the three-component n-hexane + benzene + sulfolane system in a micro extractor. Experiments were carried out in a microtube with a diameter of 800μm using a T-shaped micromixer at a residence time of 15s. Temperature and the ratio of solvent (sulfolane) to feed (95% n-hexane + 5% benzene) investigated as operational variables. The temperature was investigated at (313.15, 323.15, and 333.15) K, and the solvent to feed ratio was investigated in five states including (0.33, 0.50, 1.00, 2.00, and 3.00) mL/mL. The results of experimental design and statistical analysis showed that operational variables had a significant impact on the distribution coefficient and selectivity. It was found that distribution coefficient and selectivity reached their highest levels at (313.15 and 32315) K, respectively. In addition, in the low volumetric solvent to feed ratio (0.33ml/ml), the highest levels of distribution coefficient and selectivity were been obtained. Finally, the results obtained for liquid-liquid extraction of n-hexane + benzene + sulfolane were assessed using NRTL and UNIQUAC models, and the results confirmed the high accuracy of both models.